Subject	Thoughts on this idle issue
Posted by	MeatMan - 604Z.ca - on April 22, 2013 at 1:27 AM
	This message has been viewed 369 times.
Message	IPP stage 4 Newish idle control valve Plugs gapd to 30 I bought this engine (long block only) from a local guy, and this issue was happening to his car when the engine was in his car and he never figured what the cause was. Now the engine is in my car and doing the same thing. All of my idle control equipment was switched over to the new engine. Makes me kinda think... Is this a inherent "500 cam" issue? Sorry, I can't member how to make the link an actual link... [ http://youtu.be/ojQTIR0b99E ] ----------------------------------- A man once asked me if I took certain things seriously. I guess I made it seem like I didn't, but I do. Now people tell me I take things too seriously, but they don't understand. They don't care either. I don't feel they respect or understand what I'm trying to achieve. Perhaps it is their own sense of failure that is trying to sustain and validate itself.
Follow Ups	Thoughts on this idle issue - MeatMan - 604Z.ca - 01:27:45 04/22/13 I would say that looks a bit like a small vac leak - Medallion Man 02:47:44 04/22/13 Throttle bodies were balanced by Greg when he was here, - MeatMan - 604Z.ca - 10:09:53 04/22/13 IIRC mine wandered like that when my throttle cables were - LJZTT 04:08:40 04/22/13 I will check the tension to ensure there is no issue there.. - MeatMan - 604Z.ca - 10:05:27 04/22/13 Re: I will check the tension to ensure there is no issue there.. - Huber300zx 14:29:34 04/22/13 Your idle AFR is rich, should be more like your cruise AFR - ttsmokin 16:22:29 04/22/13 It is dyno tuned, and my old engine was set with datascan... - MeatMan - 604Z.ca - 17:07:32 04/22/13 Sorry Josh, was talking to Huber300zx (n/m) - ttsmokin 23:34:19 04/22/13 update your profile(use firefox or chrome).... - PiotrC70 21:38:51 04/22/13 I'm assuming the mods are not the same as in your profile - i_s_64 04:41:41 04/22/13 Mods are the same except the long block - MeatMan - 604Z.ca - 10:02:46 04/22/13 But was it degree'd with adjustable camshaft gears? - i_s_64 10:16:58 04/22/13 You're correct on the lower compression with aggressive - PiotrC70 21:32:13 04/22/13 I have 500 cams. My idle is steady. Only issue that I have - MixManMash 08:23:57 04/22/13 Are you positive that your AAC solenoid is functioning? - Evan_Wright (Ca) 10:30:35 04/22/13 Pretty sure. Fairly new unit and I can vary the duty cycle - MixManMash 11:03:47 04/22/13 Yeah, sounds like your AAC is working fine :) - Evan_Wright (Ca) 11:07:40 04/22/13 whats the suspected part ordered? ;) (n/m) - samsung-Z [Houston] 13:17:08 04/22/13 Me 3! I Have 500 cams, SAME issue - VERTTZ 18:18:21 04/22/13 are your mafs experiencing turbulence from direct airflow - samsung-Z [Houston] 19:54:44 04/22/13 Possibly. But I have ruled that out... - VERTTZ 02:14:10 04/23/13 After talking with Greg, I understand now how to properly - PiotrC70 21:23:08 04/22/13
Post a Followup	You cannot reply to this message because you are not logged in.