Subject	Bi-Xenon E46 Projector Retrofit
Posted by	iceman601 on April 01, 2013 at 2:06 AM
	This message has been viewed 1811 times.
Message	Back at it again, but this time its with some Bi-Xenon E46 Projectors off a 2011 BMW M3. Had to cut up the oem headlights a whole lot more than with the S2K ones to accommodate the high beam solenoid. Obviously the cutoff is no more near the S2K but the overall light pattern is still a great improvement over stock. Also did the color mod on these projectors to give it some more blue to it. Here they are....chopped, stuffed, centered, and mounted. All cut up to have it sit as dead centered as possible. These projectors are slightly bigger than stock. Mission accompolished Lost a day on projectors with the keys to this beast =D...still have a smile from ear to ear Lights on with no lens cover High beam activated.....no finished pics of both on because I still need to rewire the low to stay on with the highs. Almost complete Installed Back to the same spot for the shoot
Follow Ups	Bi-Xenon E46 Projector Retrofit - iceman601 02:06:33 04/01/13 Looks good. But a 2011 M3 is an E90/92 (n/m) - Summeronthechain (MN) 07:11:14 04/01/13 Good catch, somehow e46 was just stuck in my head. (n/m) - iceman601 09:35:13 04/01/13 How do you rewire the low to stay on with the highs? (n/m) - LoqueZ32(SoCal) 10:08:40 04/01/13 Re: How do you rewire the low to stay on with the highs? - sonazty 11:55:29 04/01/13 Re: How do you rewire the low to stay on with the highs? - sonazty 11:59:43 04/01/13 You can ground it near the headlight connector for - ThunderZ 20:19:13 04/01/13 How long did the whole project take? - BlitZ91TT 21:19:00 04/02/13 Thanks....they could have been done in 2 days - iceman601 22:58:49 04/02/13 Some high beam shots - iceman601 22:55:06 04/02/13
Post a Followup	You cannot reply to this message because you are not logged in.