Subject	I have the JECS style ones on my car.
Posted by	AHos(Chicago) on March 21, 2013 at 6:17 PM
	This message has been viewed 181 times.
In Reply To	If you don't like using those, try this... posted by DarkZide on March 21, 2013 at 04:33 PM
Message	I got mine from NAPA, which I'm assuming are the same clamps - They look exactly the same. I installed them during the summer and have taken them off maybe once or twice. I over tigtened them a little, so I wouldn't have to worry as much when it got colder out. So far I have had to retighten only one of them. I actually had to retighten the same clamp twice. I think I over tightened too much - after tigtening it down, I reduced the fuel line diameter so far that it maxed out the clamp. I moved it over a little to a spot which hadn't been compressed and it hasn't leaked since. I dont really see the point in switching to a longer bolt. I feel like as long as these are tightened when the line is cold and at its minimum diameter (or slightly over tightened), they should be fine when it stretches and compresses again. I dont know if that minimum diameter changes after a couple cycles though.
Follow Ups	Alternative fuel line clamps, who has used these? - Coldfusown 13:40:07 03/21/13 I have used them, they don't leak. (n/m) - pieboy100 14:05:55 03/21/13 i believe nissan uses them exclusively on new models - Adam (NoVA) 14:08:09 03/21/13 How many times can they be re-used? (n/m) - Evan_Wright (Ca) 14:10:42 03/21/13 So far, no limit. Then again, how often are you removing - Nate (NoVA) 14:24:15 03/21/13 I believe they are not meant to be reused (n/m) - itsa300zx 14:32:45 03/21/13 This (n/m) - BigTDogg (MA) 21:14:43 03/21/13 Thank you guys, just placed my order. (n/m) - Coldfusown 14:32:30 03/21/13 Nice, Im picking em up soon looks like.. - Drk93TT 15:11:59 03/21/13 I didn't like them at all. - fuzzymonkey 15:21:52 03/21/13 They aren't supposed to be reused but they certainly can be - WhiTTe Z 15:58:27 03/21/13 If you don't like using those, try this... - DarkZide 16:33:36 03/21/13 Whoa, did you take that picture with a magnifying scope?! :) - bartz32tt 17:54:44 03/21/13 The clamps dont really loosen... - ZXoltan 18:09:35 03/21/13 I've had problems with those cheap hose clamps, OEM ftw (n/m) - ttsmokin 18:11:51 03/21/13 I learned from Mike Smith to put hex screws in the oem clamp - fuzzymonkey 18:55:41 03/21/13 I have the JECS style ones on my car. - AHos(Chicago) 18:17:42 03/21/13 I put them on my own car many, many years ago - Joe@ZSpeedperformance 21:52:01 03/21/13 ^ This - alpha_omega16 00:45:55 03/22/13 Hey Joe, which "fuel inlet hoses" exactly? - ZXoltan 06:36:23 03/22/13 Filter to Engine, Engine to return - Joe@ZSpeedperformance 11:40:00 03/22/13
Post a Followup	You cannot reply to this message because you are not logged in.