Subject	Ever consider a Canton Accusump? I've heard mixed things
Posted by	evan_aggie on March 12, 2013 at 7:53 AM
	This message has been viewed 229 times.
In Reply To	My Gravity Assisted, Head oil-drain Scavenging Setup posted by ZinnZ32 on March 11, 2013 at 11:06 PM
Message	regarding their purpose. Most folks will all agree they are decent ways to prelube the system. However, I'm not sure it has been fully understood what happens when pressure drops and the sump kicks in. If you set the sump to supply below 50psi, one has to wonder what you have to do to get into that situation. I'd assume the oil pick-up tube would start to go partially dry and the pressure would fall-off. The question is...would the Accusump be able to work quickly enough to recover or would the damage to the bearings already be in progress? I think Kuah had an Accusump on his green race car and still spun a bearing.
Follow Ups	My Gravity Assisted, Head oil-drain Scavenging Setup - ZinnZ32 23:06:26 03/11/13 The SZ oil pan was built specifically for track use, - MeatMan - 604Z.ca - 00:52:17 03/12/13 would be nice to have an option so other ppl could do - genic 01:36:50 03/12/13 very nice, glad someone tried this. (n/m) - toykoz32 01:52:11 03/12/13 Re: My Gravity Assisted, Head oil-drain Scavenging Setup - WazTTed 02:23:57 03/12/13 Good point, just make sure you use proper sealing medium - ZinnZ32 10:42:39 03/12/13 Very interesting idea. Thanks. (n/m) - Boosted1 06:05:16 03/12/13 Ever consider a Canton Accusump? I've heard mixed things - evan_aggie 07:53:26 03/12/13 Re: Ever consider a Canton Accusump? I've heard mixed things - Canton Racing Products 10:24:28 03/12/13 How did you arrive at this thread? Do you google "Canton" - evan_aggie 13:54:36 03/12/13 Advanced google search for accusump + recent hits. - Dallas DamonZ 01:10:16 03/13/13 Oh, and I disagree a little...maybe. I think it depends - evan_aggie 13:59:53 03/12/13 Yes, I mentioned an A.S. w/ Baffled pan is in the works! - ZinnZ32 10:29:12 03/12/13 Interesting. I'd be curious how you know it's working. - Jayru 09:10:54 03/12/13 I wouldnt think so either, as its not at the low point. (n/m) - white22sky 09:14:40 03/12/13 Greg had previously mentioned the need for pumps to send the - evan_aggie 10:14:04 03/12/13 Wonder if one of these pumps would work well - ttsmokin 16:27:11 03/12/13 damn that thing is huge.... (n/m) - evan_aggie 17:20:27 03/12/13 Yea, might work good in battery tray if its been relocated? (n/m) - ttsmokin 20:31:48 03/12/13 I am not so sure about that... I believe it does help still - ZinnZ32 10:33:43 03/12/13 & Yes pumps would work better, but not practical for street - ZinnZ32 10:36:59 03/12/13 Do you have any way of logging the pressure difference? - RobZ32 11:30:58 03/12/13 I started out this way - Dallas DamonZ 09:23:45 03/12/13 Kuah had a similar setup - Broke_as_**** 11:01:09 03/12/13 Pardon my ignorance but wouldn't it make more sense - intel 12:31:10 03/12/13 The restrictors do work to a degree, but it's a band-aid fix (n/m) - ZinnZ32 13:03:52 03/12/13 To Elaborate further... - ZinnZ32 13:10:47 03/12/13 Re: My Gravity Assisted, Head oil-drain Scavenging Setup - BeBoosted 15:49:09 03/12/13 gravity isn't really that effective in a high speed turn - aliaZ 10:49:20 03/13/13 your Z reminds of Chris(NJ) or Zengineer .."old school' :) (n/m) - The Devils Z 21:13:41 03/13/13
Post a Followup	You cannot reply to this message because you are not logged in.