Subject	The plenum usually picks up oil through the poorly
Posted by	Xteam300TT (South Tx ) on March 07, 2013 at 11:58 PM
	This message has been viewed 168 times.
In Reply To	Pools of oil in the plenum? posted by Black95 on March 07, 2013 at 11:33 PM
Message	routed (factory) pcv system . This is not uncommon and most people fix it by doing the pcv reroute found in the auto_faq . By looking at your previous posts it looks like a rebuild is in order and the root of your low compression will surface at that time. Even if it is a bent valve on that cylinder , the compression on all the other cylinders is not that great and you may want to consider a rebuild anyway . I would assume that bad blow by from a bad cylinder would only increase the amount of oil being sucked into your plenum .
Follow Ups	Pools of oil in the plenum? - Black95 23:33:46 03/07/13 sounds like a pcv problem - Red Hawk (CO) 23:47:27 03/07/13 The plenum usually picks up oil through the poorly - Xteam300TT (South Tx ) 23:58:15 03/07/13 I have the same problem. I pulled my plenum and changed - Hydrus 23:59:49 03/07/13 Thanks for the replys so far guys. I have to call it a night - Black95 00:24:57 03/08/13 If there is that much oil in the plenum, but not IC pipes - Summeronthechain (MN) 11:35:39 03/08/13
Post a Followup	You cannot reply to this message because you are not logged in.