Subject	Leak down test on #6. Rings and Valves?
Posted by	Black95 on March 03, 2013 at 6:57 PM
	This message has been viewed 232 times.
Message	Would it be unusual or common to have the rings and intake valves go on the same cylinder This is a follow up to: [ http://twinturbo.net/nissan/300zx/forums/general/view/2532744/Compression-test-results.html ] The test shows around 90% loss. I hear air from both the oil cap and the intake. I check #2 to insure I was finding TDC correctly and I found around 5-7% loss. On both cylinders, I think I intitially had them in the exhaust stroke and rotated to find these results.
Follow Ups	Leak down test on #6. Rings and Valves? - Black95 18:57:53 03/03/13 I'm confused--Sounds like you didn't have cylinder at TDC - ZXoltan 19:21:32 03/03/13 I used the exact same method to get TDC on a different - Black95 19:38:54 03/03/13 Almost sounds like it's pushing air through the PCV system - MixManMash 08:17:25 03/05/13
Post a Followup	You cannot reply to this message because you are not logged in.