Subject	I did right when I got it
Posted by	Bumblebeetuna on February 11, 2013 at 3:13 PM
	This message has been viewed 241 times.
In Reply To	you dont get any shuddering during low rpm releases? posted by Red Hawk (CO) on February 11, 2013 at 01:02 PM
Message	but then I got use to it. took some time but for being heavy duty and unsprung its not bad. I called and talked with greg before I bought it and he said something like, most of the sprung 6 puck plates are made by the same manufacturer and the plate is stamped causing each puck to be uneven with each other. This is why most puck clutches chatter, one or two pucks are hitting the flywheel before the other. The High 5 is not stamped and perfectly flat allowing each puck to contact the flywheel at the same time. the material on the high 5 is pretty aggressive so it grabs good, it just takes time to get use to. Greg would be the best person to talk to about this.
Follow Ups	RPS/SZ Max 6 puck, SZ High 5 for streetability? - Jkova300z 10:33:24 02/11/13 ^ to clarify, I was asking what are the differences - Jkova300z 10:45:10 02/11/13 Define a couple of strip runs. - johnnysombrero 10:45:34 02/11/13 I came to the same conclusion...you don't "casually" do - LJZTT 15:52:26 02/12/13 High 5 is very streetable. - Bumblebeetuna 11:38:51 02/11/13 you dont get any shuddering during low rpm releases? - Red Hawk (CO) 13:02:17 02/11/13 Mine did too. - coma_ass 13:39:15 02/11/13 I did right when I got it - Bumblebeetuna 15:13:42 02/11/13 I run the SZ 6 puck and it's drivable in traffic. - Spongerider :) 12:41:27 02/11/13 what about red lights on hills? lmao (n/m) - rmp459 15:16:32 02/11/13 I have a 6 puck and I would never consider it comfortable - TTZEDHEAD 17:20:57 02/11/13 Let me put it this way the SZ High5 will explode it hotlaped (n/m) - sdhsbaseball 20:14:01 02/13/13 AND is slipped off the line (n/m) - sdhsbaseball 20:14:59 02/13/13 I wanted the same thing from my car - Zsgetyoulaid 16:12:09 02/11/13 Dude, Sofia Vergara and I are getting married!! - LJZTT 15:58:01 02/12/13 Hence the disclaimer (n/m) - Zsgetyoulaid 15:27:19 02/13/13 I have the RPS Segmented Flywheel and SZ Hi-5 clutch - PiotrC70 20:37:37 02/11/13 same setup, and I have the zspeed clutch fork as well - fuzzymonkey 12:48:33 02/12/13 is the shuddering definitely because of the clutch or can it - LJZTT 16:20:01 02/12/13 For me, it's definitely the clutch. The stock NA clutch - PiotrC70 18:44:10 02/12/13
Post a Followup	You cannot reply to this message because you are not logged in.