Subject	before you do, shoot some WD40 into the selenoid housing
Posted by	Gordo 93TT Daytona on January 28, 2013 at 9:28 AM
	This message has been viewed 108 times.
In Reply To	Your troubleshooting is on target. I'd try a shot of WD-40 posted by Gordo 93TT Daytona on January 27, 2013 at 09:39 PM
Message	while it is still on the car. Insert the red tubing in through the rubber hose on the driver's side. Sometimes a shot will free up a stuck piston. Otherwise, it is an easy R&R using 1/4" drive on the four (4) 10 mm bolts. Get a gasket first if you can. They are thin and will break. _________________________________________________
Follow Ups	High idle after PCV valve replacement - weezee 20:49:11 01/27/13 Your troubleshooting is on target. I'd try a shot of WD-40 - Gordo 93TT Daytona 21:39:11 01/27/13 Re: Your troubleshooting is on target. I'd try a shot of WD-40 - weezee 09:04:39 01/28/13 before you do, shoot some WD40 into the selenoid housing - Gordo 93TT Daytona 09:28:28 01/28/13
Post a Followup	You cannot reply to this message because you are not logged in.