Subject	I did it
Posted by	KA8 on January 02, 2013 at 10:26 AM
	This message has been viewed 575 times.
In Reply To	Downpipe Install Instructions posted by LoqueZ32(SoCal) on January 02, 2013 at 01:21 AM
Message	You definitely need alot of patience, the stubby's, and small hands. And yes you need to remove the brake master cylinder. Passenger side is pretty easy with battery removed but driver side is a b@#$h. Installation is very easy but make sure you recheck after couple of weeks because my bolts were backing out, you can apply so much torque with the stubby's.
Follow Ups	Downpipe Install Instructions - LoqueZ32(SoCal) 01:21:21 01/02/13 Well you got the hard part out of the way - Tony@GZ 08:10:20 01/02/13 really only two reasonable ways... - rmp459 08:48:04 01/02/13 I did it - KA8 10:26:12 01/02/13 My precat removal post may help a bit... - 240Z FeO2 11:19:15 01/02/13 Thanks for the tips...got them installed :) (n/m) - LoqueZ32(SoCal) 22:24:07 01/02/13 Excellent! (n/m) - Tony@GZ 05:06:16 01/03/13 So is 13mm the only stubby required? - WhiTTe Z 23:34:54 01/03/13 Yup, or at least that's the only one I used (n/m) - LoqueZ32(SoCal) 18:46:28 01/04/13
Post a Followup	You cannot reply to this message because you are not logged in.