Subject	Downpipe Install Instructions
Posted by	LoqueZ32(SoCal) on January 02, 2013 at 1:21 AM
	This message has been viewed 2628 times.
Message	Found this post regarding installing downpipes without removing the transmission but the embedded link is dead. Anyone have a copy or know if it is hosted elsewhere? If not, any tips on installing without removing the transmission. I've read of removing the brake master cylinder to open up more room to the driver side and also using a pair of stubby wrenches. I already have the old ones off. Passenger side wasn't too bad and driver side was easy because the downpipe had broken off and only the flange was left on the turbo so accessing the bolts was easy. TIA
Follow Ups	Downpipe Install Instructions - LoqueZ32(SoCal) 01:21:21 01/02/13 Well you got the hard part out of the way - Tony@GZ 08:10:20 01/02/13 really only two reasonable ways... - rmp459 08:48:04 01/02/13 I did it - KA8 10:26:12 01/02/13 My precat removal post may help a bit... - 240Z FeO2 11:19:15 01/02/13 Thanks for the tips...got them installed :) (n/m) - LoqueZ32(SoCal) 22:24:07 01/02/13 Excellent! (n/m) - Tony@GZ 05:06:16 01/03/13 So is 13mm the only stubby required? - WhiTTe Z 23:34:54 01/03/13 Yup, or at least that's the only one I used (n/m) - LoqueZ32(SoCal) 18:46:28 01/04/13
Post a Followup	You cannot reply to this message because you are not logged in.