Subject	Just did this on my Z but also changed out the stock
Posted by	jzack on November 13, 2012 at 7:10 PM
	This message has been viewed 137 times.
In Reply To	What size power steering belt are you running with UDP? (n/m) posted by njz on November 13, 2012 at 05:13 PM
Message	alty (due to failure) to a 90 amp new aftermarket model and that came with a smaller pulley wheel than stock (so it turns faster). Used NAPA belt #25-030350 - 35 inch belt. This one is smaller than what I had on there -- pretty sure by 1.5 inches. Just check the NAPA belts, it's the next one larger than the number I posted... Even with this one -- still took a few tries to get it tight enough after letting is settle for a few days to stretch...
Follow Ups	What size power steering belt are you running with UDP? (n/m) - njz 17:13:31 11/13/12 I used a longer one - Drk93TT 17:57:58 11/13/12 Gates K030350 - Broke_as_**** 18:44:56 11/13/12 Just did this on my Z but also changed out the stock - jzack 19:10:32 11/13/12 Thanks all. I have the goodyear gatorback 4040355 - njz 19:22:17 11/13/12 3 or 4 rib 880 depending on application. (n/m) - Bernie (NoVA) 19:18:41 11/13/12 4 rib. What's the 880? (n/m) - njz 19:27:55 11/13/12 mm (n/m) - Dallas DamonZ 20:39:24 11/13/12 Unorthodox Racing Rev-f pulley uses the stock size belt. (n/m) - not4resaleZ 21:52:01 11/13/12 880mm same as stock thank you. (n/m) - njz 06:09:02 11/14/12
Post a Followup	You cannot reply to this message because you are not logged in.