| Getting under way 
Old set up stock calipers with 350Z track rotors, brackets, and SS lines
350Z track rotors 12.8" vs Akebono Nismo 370Z 14" rotors
Stock Twin Turbo calipers vs SRT-8 Brembo calipers 
Here's an example of why you need the shorter bolt, it will hit the caliper.
I could not the bolt at all the local hardware stores and didn't want to risk settling for something that kind of fits, so I trimmed nine threads 
I could not reuse the other bolt that go from the bracket to the caliper because they were too long since I had brackets for the 350Z track rotors. Again, I could not find bolts to match the bolts pattern needed for the Brembo calipers, and again didn't want to settle for a critical component. I went to a Dodge dealership and picked up the bolts that match the Brembos. Had to trim approximately 8 threads and for the bottom bolt, trimmed the head. My StopTech SS lines did not come with the banjo bolt, so I also got that at the Dodge dealership. The bleeder screws were purchased at Advance Auto Zone. I did not trim the dust shield at all. 
StopTech Stainless Steel Lines
Final result 
Uploaded with ImageShack.us |
SRT-8 Brembos with 370z Rotors - 
