Subject	yes bnr32 coilovers will fit the z32
Posted by	lidz on November 07, 2012 at 7:34 PM
	This message has been viewed 474 times.
In Reply To	Quick Q: Are Z32 shocks same as R32 GTR? posted by EZdusit (cali) on November 07, 2012 at 02:27 AM
Message	Only coilovers for the r32 gtr & gts4 will fit, not the rwd models as they have different lower mounts on the rears. The fronts may need the pillowball mounts trimmed slightly though, the bnr32 uses a circular mount where as the z32 mount is more of an oval. The circular mount will foul against the inside edge of the guard but by removing a small amount of material will bolt straight up (only need to trim side closest to engine). Not all of them need trimming, this is brand/model dependent. I am currently running hks hipermax 2's for the bnr32. cheers, Tim
Follow Ups	Quick Q: Are Z32 shocks same as R32 GTR? - EZdusit (cali) 02:27:22 11/07/12 You should totally spend the next 5 hours of your life - Zvil (FL) 13:38:16 11/07/12 Fuel temp sensor - Obeeone 15:32:31 11/07/12 Fuel temperature= ecu will raise fuel pressure when too hot (n/m) - Zvil (FL) 19:32:21 11/07/12 Okay! - Stadsport (Nick@CZP) 23:36:20 11/07/12 while your making changes - lidz 00:39:43 11/08/12 Fixed, thanks - Stadsport (Nick@CZP) 01:38:02 11/08/12 Ask and you shall receive - Stadsport (Nick@CZP) 00:26:10 11/08/12 While the parts may bolt up, it probably wouldn't work. - BlackholeZ 13:51:41 11/07/12 Re: Quick Q: Are Z32 shocks same as R32 GTR? - Cosmik Debris 14:10:14 11/07/12 yes bnr32 coilovers will fit the z32 - lidz 19:34:03 11/07/12
Post a Followup	You cannot reply to this message because you are not logged in.