Subject	That's where the spacer will help correct?
Posted by	Davez on October 27, 2012 at 5:21 PM
	This message has been viewed 80 times.
In Reply To	The problem w. the VS-5 is the taper of the inside barrel (n/m) posted by Bernie (NoVA) on October 27, 2012 at 03:32 PM
Message	I should be able to just go with a bigger spacer if need be to push the inside if the spoke area and tapered edge away from the caliper as long as the overall inside dia is large enough to accommodate them.
Follow Ups	AP Racing 6-piston fitment question. - Davez 17:18:46 10/26/12 With the spacer I think you'll be ok. (n/m) - Bernie (NoVA) 02:32:08 10/27/12 Re: With the spacer I think you'll be ok. - Davez 10:36:57 10/27/12 The problem w. the VS-5 is the taper of the inside barrel (n/m) - Bernie (NoVA) 15:32:53 10/27/12 That's where the spacer will help correct? - Davez 17:21:08 10/27/12 Right as long as you don't end up outside of the fender (n/m) - Bernie (NoVA) 13:30:22 10/28/12 Talk to Alex lee (DE).. - KongZTT GT28RS MD 12:49:43 10/28/12 I think Alex has 17s on the front w. the 13" kit - Bernie (NoVA) 13:31:25 10/28/12
Post a Followup	You cannot reply to this message because you are not logged in.