Subject	Re: With the spacer I think you'll be ok.
Posted by	Davez on October 27, 2012 at 10:36 AM
	This message has been viewed 79 times.
In Reply To	With the spacer I think you'll be ok. (n/m) posted by Bernie (NoVA) on October 27, 2012 at 02:32 AM
Message	That's what I was thinking I wasn't too worried about that clearance because I could always go with a bigger spacer If needed for hitting the spokes, I was concerned with the inside diameter of the rim coming in contact with the caliper in the 14.25" rotor kit. The fitment guide that they want you to print out and try looks like Spanish to me. It does say it fit in the 350z with the stock 18" rims. So I'm just wondering how much different the caliper mounting is on that vs the 300.
Follow Ups	AP Racing 6-piston fitment question. - Davez 17:18:46 10/26/12 With the spacer I think you'll be ok. (n/m) - Bernie (NoVA) 02:32:08 10/27/12 Re: With the spacer I think you'll be ok. - Davez 10:36:57 10/27/12 The problem w. the VS-5 is the taper of the inside barrel (n/m) - Bernie (NoVA) 15:32:53 10/27/12 That's where the spacer will help correct? - Davez 17:21:08 10/27/12 Right as long as you don't end up outside of the fender (n/m) - Bernie (NoVA) 13:30:22 10/28/12 Talk to Alex lee (DE).. - KongZTT GT28RS MD 12:49:43 10/28/12 I think Alex has 17s on the front w. the 13" kit - Bernie (NoVA) 13:31:25 10/28/12
Post a Followup	You cannot reply to this message because you are not logged in.