Subject	You want to keep the bose amplifiers and boxes and use the
Posted by	CmyZ on October 12, 2012 at 5:01 PM
	This message has been viewed 276 times.
In Reply To	Speaker replacement issues... posted by JMartz on October 12, 2012 at 01:28 PM
Message	current Alpine head unit. Okay, so you will need an integration device from PAC to control the signal from your Alpine to the bose amplifiers. I would replace the top portion of your rear Bose enclosures with the 1990 300ZX 6.5" opening or use the 6.5 adapters from Ebay. They are made from MDF and others I have seen are made from ABS. They work fine. [ http://www.ebay.com/itm/Nissan-300ZX-Front-Speaker-Adapters-to-fit-6-5-/250909526733?pt=US_Adapters&hash=item3a6b5f8acd ] [ http://www.ebay.com/itm/Nissan-300ZX-Rear-Speaker-Adapters-to-fit-6-5-/380110974396?pt=US_Adapters&hash=item5880612dbc ] Then you can mount any speaker you like.
Follow Ups	Speaker replacement issues... - JMartz 13:28:06 10/12/12 You'll need an inline adapter for the speakers - s3trios 13:38:52 10/12/12 Have a used one for sale if you want it. (n/m) - TheMarlin (MidTN) 14:07:37 10/13/12 Thanks but I am not looking to keep the Bose - JMartz 16:43:31 10/13/12 You want to keep the bose amplifiers and boxes and use the - CmyZ 17:01:17 10/12/12 Depth? - BigZness 09:47:40 10/13/12 I would say you can go up to 2.75", I have a set of - CmyZ 11:19:49 10/13/12 You installed the speakers you mention directly on - JMartz 16:42:28 10/13/12 Raam mat, and patches of Ensolite.. No box used.. (n/m) - CmyZ 20:31:35 10/13/12 Re: Speaker replacement issues... - 300ZXTT007 00:23:27 10/14/12
Post a Followup	You cannot reply to this message because you are not logged in.