Subject	Help!
Posted by	blackomega on October 06, 2012 at 2:47 PM
	This message has been viewed 259 times.
Message	So my builder got my Z running "beautifully", but the AN swivel on the Z1 oil cooler line is leaking. The swivel near the pan. Its either the swivel itself or a bad insertion between the swivel and the line. It is leaking a drop every 30 seconds. I can't drive it far, and it needs to be fixed. Builder says he *can* tighten it but is afraid it will strip. My builder is highly knowledgeable but I wanted to post up and see if anyone else has had this problem with the Z1 oil cooler AN fittings, and if it was a bad line, bad fitting, or what, as well as how you fixed the problem, thru Z1, on your own, *tightened it*, etc. What about silicone or gunk or anything?? ___________________ "If everybody is thinking alike, somebody isn't thinking." ~~ George S. Patton DD: La-Z-Link
Follow Ups	Help! - blackomega 14:47:40 10/06/12 Re: Help! - blackomega 14:58:43 10/06/12 looks like the hose wasn't inserted properly - aliaZ 18:29:20 10/07/12 Re: Help! - chicagozer 15:01:10 10/06/12 call z1 and ask direct - Drk93TT 16:45:27 10/06/12 wonder how thats gonna go with z nats... (n/m) - blackomega 20:19:07 10/06/12 Is it just me or does it seem like AN fittings leak a lot.. (n/m) - Supermario680 (WI) 06:08:45 10/07/12 here - aliaZ 18:27:30 10/07/12 This leak is not common and will be repaired / replaced .... - Josh@Z1 13:20:33 10/08/12
Post a Followup	You cannot reply to this message because you are not logged in.