Subject	Cam seal leak again.
Posted by	kennys300zxtt on October 06, 2012 at 11:01 AM
	This message has been viewed 311 times.
Message	So I have a 91 300ZX TT. It has aftermarket custom ground cams and this engine has been apart 3 times. The original engine the cam seals leaked. I did a full engine build and put it together and the seals leaked again. Pulled it back apart and put it bak together they leak worse now than the prior times. Any ideas whats going on? If cam sprockets have issues could it cause this? Also it is just the 2 intake cam seals that leak but it is both of them every time.
Follow Ups	Cam seal leak again. - kennys300zxtt 11:01:35 10/06/12 See if the back plate spins with your hand on the VTC gears. - nissanguyz32 11:21:28 10/06/12 i have had to replace intake sprockets to fix a intake cam - Dane (Houston) 11:54:23 10/06/12 Are you lubing the seal up with oil, especially the..... - TTZ2NV(EPTmotorsports) 00:58:20 10/07/12 Did you inspect the cam seal sealing surfaces for damage? (n/m) - Supermario680 (WI) 06:11:19 10/07/12 Re: Cam seal leak again. - scottmt21 09:55:28 10/08/12
Post a Followup	You cannot reply to this message because you are not logged in.