Subject	Questions/Discussion
Posted by	fuzzymonkey on October 04, 2012 at 4:21 PM
	This message has been viewed 168 times.
In Reply To	Stick and Auto are different........... posted by Greg D. (Specialty-Z) on October 04, 2012 at 03:13 PM
Message	Background: Was an auto > 5sp conversion! > Stick or Auto will not activate the VTC with Neutral switch ON. > > On a stick, you can simply unplug the neutral switch to get > a neutral off signal and the VTC will work as long as the ECU > receives the other signals needed for VTC activation. But with the switch unplugged, now what was the point of the switch to begin with? > When you put a AUTO in drive, the ignition timing advances 10 > degree's at idle. This is why I grounded pin 44 from the ECU as I was unable to set my timing to the base timing in DataScan being 25. Is this a setting conducted by the ECU (still running generic ash tune for AT) or the ACU? Will unplugging the ACU help me out in any case?
Follow Ups	If neutral switch is always ON, so what? - fuzzymonkey 13:22:46 10/04/12 Stick and Auto are different........... - Greg D. (Specialty-Z) 15:13:12 10/04/12 Questions/Discussion - fuzzymonkey 16:21:18 10/04/12 Re: Questions/Discussion - Greg D. (Specialty-Z) 17:03:32 10/04/12 I love you. - fuzzymonkey 17:30:17 10/04/12 Nice! (n/m) - Dane (Houston) 17:33:16 10/04/12 So if you have a auto>5spd with 5spd tune ecu and deleted - LivinTheDream 22:40:31 10/04/12 I just got a 5sp tune, and deleted the ACU. No problems on - fuzzymonkey 12:56:48 10/05/12
Post a Followup	You cannot reply to this message because you are not logged in.