Subject	Looking at the FSM it only shows like 15ft/lbs on the bolts.
Posted by	Lumpydonut on August 30, 2012 at 8:48 AM
	This message has been viewed 91 times.
In Reply To	Good job, I never use any sealant. Clean the gasket posted by CmyZ on August 29, 2012 at 09:10 PM
Message	Seems kind of low to me but it is the only spec I could find. Is this right? The bolts were pretty nasty when I pulled them so I let them soak in cleaner then dry and put a dribble of silicone spray on them. Helps torque numbers be more accurate, similar to the ARP moly lube.
Follow Ups	First Plenum Install... - Lumpydonut 20:26:13 08/29/12 I replace the gasket with a brand new OEM one EVERY pull - MrOzzie5183 20:41:19 08/29/12 Good job, I never use any sealant. Clean the gasket - CmyZ 21:10:41 08/29/12 Looking at the FSM it only shows like 15ft/lbs on the bolts. - Lumpydonut 08:48:59 08/30/12 Yes that is the torque specification. That is what I use. - CmyZ 09:21:09 08/30/12 15 is so dinky! My torque wrench won't work that low :( (n/m) - fuzzymonkey 11:24:53 08/30/12 I bought an inch pound torque wrench - MrOzzie5183 12:49:00 08/30/12 Nicely done.. - Drk93TT 21:59:25 08/29/12 I used a razor to get a majority of the gasket off - Lumpydonut 11:21:07 08/30/12
Post a Followup	You cannot reply to this message because you are not logged in.