Subject	Won't fit. This wheel's spoke and barrel design don't fit
Posted by	MixManMash on July 15, 2012 at 3:28 PM
	This message has been viewed 172 times.
In Reply To	17x9 +35 275's all around. (n/m) posted by Antihero on July 15, 2012 at 03:15 PM
Message	in this size unless you go with +45 offset and a 10mm spacer. If you have a BBK, it still is questionable if it will fit with the spacer. I know they wouldn't clear my Stoptechs. They clear the smaller Wilwood kit.
Follow Ups	Enkie RPF1 - ZXRider 14:41:44 07/15/12 17x9 +35 275's all around. (n/m) - Antihero 15:15:44 07/15/12 Won't fit. This wheel's spoke and barrel design don't fit - MixManMash 15:28:15 07/15/12 not true. i have 17x9 rpf1s all around with skyline - fst300zx 17:20:56 07/15/12 Read carefully. I said with spacer, it maybe possible with - MixManMash 07:44:45 07/16/12 2nd; I have this wheel on another car; will not fit front (n/m) - RSR 08:05:07 07/16/12 Guapo runs RP-01s - SactoTodd 15:24:52 07/15/12 Completely different wheel and fitment... I have both (n/m) - vorpalZ 00:24:32 07/16/12 Mine are 17X9 +45 offset, 10mm spacer front, none rear - vorpalZ 00:23:00 07/16/12 Nice. Need the spacer with the stock calipers also? - ZXRider 00:49:22 07/16/12 Yes, you will need the spacer on stock brakes. - MixManMash 07:47:46 07/16/12 Do 18x9 and 18x10 have these same issues? (n/m) - sdhsbaseball 14:19:04 07/16/12 no issues here with this setup . (n/m) - ArubaDave 14:31:51 07/16/12
Post a Followup	You cannot reply to this message because you are not logged in.