Subject	what cams are you using?
Posted by	Carlos Ramirez on July 11, 2012 at 10:06 AM
	This message has been viewed 229 times.
In Reply To	Thanx for the heads up, what problems did you posted by nicky_z32 on July 11, 2012 at 09:56 AM
Message	I am using the 270 10.25mm high lift cams which is really my problem :-) I also have 1mm oversized valves and etc. Really its a big cam with no VTC. I would do it over I would probably do JWT solid lift cams or atleast get the Tomei 270s with VTC support. Heck I am still do that :-) I did bump up my idle to 800RPMS.
Follow Ups	Engine buildup teaser pics>>>> - nicky_z32 23:57:45 07/10/12 that'll be running smooth - 300ZMang 00:06:31 07/11/12 Yup will do satin black, and textured red plenum (n/m) - nicky_z32 00:16:26 07/11/12 Custom made cam gears ? (n/m) - ArubaDave 00:35:39 07/11/12 Yes, they use the OEM groove ring - nicky_z32 05:52:46 07/11/12 why did you delete VTC? (n/m) - aliaZ 08:39:13 07/11/12 Not exactly sure, I'll check with him about it (n/m) - nicky_z32 09:54:39 07/11/12 IIRC - Someone had posted dyno numbers on a build minus VTC - Jayru 10:08:10 07/11/12 That's something to consider seriously, thanx for the advise (n/m) - nicky_z32 10:47:18 07/11/12 I regret not having VTC - Carlos Ramirez 08:47:42 07/11/12 Thanx for the heads up, what problems did you - nicky_z32 09:56:37 07/11/12 what cams are you using? - Carlos Ramirez 10:06:45 07/11/12 Can't you add VTC to your existing Tomei cams by unscrewing - MixManMash 10:17:11 07/11/12 I don't believe so.. There is no galley for the oil to flow - Carlos Ramirez 10:26:42 07/11/12 Ok. I know the recently posted build of the JUN stroker - MixManMash 11:07:59 07/11/12 I'll visit the shop tonite after work and get all specs and - nicky_z32 11:12:59 07/11/12 Always worthwhile to keep a closer eye on "your" build.. - samsung-Z [Houston] 12:53:21 07/11/12 You're totally right! Even though I've worked on Z's - nicky_z32 13:19:12 07/11/12 Yes check it out, but Rafy is very good with those VG's (n/m) - CmyZ 17:08:32 07/11/12 Yes he is, we're going a little different route than we're - nicky_z32 17:15:02 07/11/12 What turbos are you going with? - Machtavian 14:55:13 07/12/12 At the moment, OEM. Until my finances get up to speed - nicky_z32 15:38:29 07/12/12 mmm raracing1.com...the guys who built the 1118rwhp Z32 - TheTwinZ (Peru) 10:56:03 07/11/12 That car is running perfectly! I dunno if he's a forum - nicky_z32 11:05:31 07/11/12 good for them. - Antihero 12:48:31 07/11/12 10K rpm? I missed that dyno post :( (n/m) - samsung-Z [Houston] 13:00:24 07/11/12 interesting. the build specs said 10k redline - Antihero 14:38:25 07/12/12 Sadly, there are not videos to that car running or anything. (n/m) - TheTwinZ (Peru) 18:32:52 07/11/12 There's gonna be a meeting and driving event on Aug 4 - nicky_z32 19:02:25 07/11/12 Old but they work... - 90GoldZ 21:42:36 07/12/12 I've seen those before...I meant to say that there are not - TheTwinZ (Peru) 10:03:46 07/13/12 Wow, that car looks like a beast! - Jayru 11:42:49 07/11/12 Yeah, it has A/C too! That car has a TON of mods... - nicky_z32 12:01:25 07/11/12 Everything looks nice, except what tensioner are you - CmyZ 14:51:11 07/11/12 Noted, thanx! I brought him new OEM tensioners and pullies - nicky_z32 15:14:32 07/11/12 Without adjustable cam gears or VTC (which I would chose Vtc - HighPsi (NorCal) 17:01:22 07/11/12 Those cam gears are adjustable (n/m) - nicky_z32 17:07:52 07/11/12 Cool, you will find with adjustables that you - HighPsi (NorCal) 17:17:28 07/11/12 Cool, thanx! I'm learning as much as I can in the process (n/m) - nicky_z32 17:34:23 07/11/12 I dont think the crank pulley is mounted right.... - gt300zxtt(HI) 17:47:55 07/12/12 I don't make pulley studs, those are made by Brett Ramey (n/m) - LitlElvis 22:32:07 07/12/12 Hey Bret, last night I was talking with Rafy about your - nicky_z32 15:45:12 07/13/12
Post a Followup	You cannot reply to this message because you are not logged in.