Subject	Replacing hoses, sizes and lengths
Posted by	Lowfategg on June 19, 2012 at 1:40 PM
	This message has been viewed 193 times.
Message	Hey guys, Doing a complete hose overhaul while my motor is out of the car. Replacing all the small vacuum lines, water lines, and fuel lines. Going reinforced silicone on the vacuum and water lines and J30R9 for fuel lines. I have done a ton of web searching trying to figure out what sizes and lengths I need, but there are no solid numbers. I am buying it by the foot because its cheaper than kits (also most kits don't include water lines). Water lines sizes 5/16" or 8mm Vacuum lines sizes (I think) 5/32" or 4mm (smaller lines) 1/4" or 6.5mm (waste gates/boost controller) Fuel line size 5/16 or 8mm How much of each do I need? I have a electronic boost controller, boost gauge, and all the deletes (water lines, EGR, carbon, PRVR, AIV).
Follow Ups	Replacing hoses, sizes and lengths - Lowfategg 13:40:56 06/19/12 I like the reinforced silicone lines from coz for coolant - Evan_Wright (Ca) 13:54:20 06/19/12 ^Agree fully (n/m) - ZXoltan 15:38:02 06/19/12 Anyone on approx lengths of each size to get the job done? (n/m) - Lowfategg 09:47:55 06/20/12 This might help with the vacuum hoses - 1911a1 13:41:19 06/20/12
Post a Followup	You cannot reply to this message because you are not logged in.