Subject	Had the same problem after my recent build and the lines
Posted by	jlag on June 12, 2012 at 12:47 AM
	This message has been viewed 232 times.
In Reply To	Some responses. posted by PiotrC70 on June 11, 2012 at 11:26 PM
Message	to my wastegate actuators were leaking at the actuators. I separated the lines at the tee and pumped them up individually to see the leak. Pump them up to 18 and see if the gauge bleeds down.
Follow Ups	Let's revisit this Wastegate syncing because I'm having an - PiotrC70 22:32:44 06/11/12 Try running the vacuum lines straight to the wastegate - michaell32 23:04:58 06/11/12 Sounds like boost creep. If your WGs are just barely - Ash's Z 23:12:26 06/11/12 Some responses. - PiotrC70 23:26:22 06/11/12 Had the same problem after my recent build and the lines - jlag 00:47:15 06/12/12 Like Ash said, I'd get under there and pressurize the lines - Evan_Wright (Ca) 07:51:52 06/12/12
Post a Followup	You cannot reply to this message because you are not logged in.