Subject	Re: Good luck on the rebuild, if your info is correct.
Posted by	ziggy300zx on May 03, 2012 at 11:07 AM
	This message has been viewed 300 times.
In Reply To	Good luck on the rebuild, if your info is correct. (n/m) posted by Draker (Eugene, OR) on May 03, 2012 at 10:24 AM
Message	I installed this nitrous kit in 1996 when the car had 35K miles on odometer. I have since run around (40) 10lb bottles of nitrous through this set up. In 1997 I ran 12.2 at 122mph on street tires with this same set up(only difference was I had manual boost controller set at roughly 18psi). In 2008 I ran 11.5 @125 on mickey thompson drag radials at 21 peak PSI with the spec2. This 11.5 should have been a low 11 run, but the car was driver handicapped. This is a wet kit that that also adds fuel with the nitrous. The leanest it got on these pulls was 11.84 so I am still a little on the rich side. I know someone will say that I can not be sure that each cylinder is getting enough fuel. This I agree with, but after 16 years and 40 bottles I feel pretty safe with this set up. Thanks Draker for wishing me luck on the rebuild and @ 120k miles I am sure it will be time for one sometime within the next 30K miles.
Follow Ups	Dyno Pull 524HP and 584TQ - ziggy300zx 10:04:49 05/03/12 nice numbers. clean Z (n/m) - Alan(MD/NJ) 10:17:06 05/03/12 Good luck on the rebuild, if your info is correct. (n/m) - Draker (Eugene, OR) 10:24:20 05/03/12 Agreed. (n/m) - MixManMash 10:28:04 05/03/12 Re: Good luck on the rebuild, if your info is correct. - ziggy300zx 11:07:23 05/03/12 Wow my man, stock injectors, pretty scary... joke? (n/m) - Z32TT-R 11:06:26 05/03/12 He's using a wet shot of NOS. That explains the numbers. (n/m) - MixManMash 11:14:32 05/03/12 BOOM!!! Good luck with that. (n/m) - phillyz 12:23:05 05/03/12 Re: BOOM!!! Good luck with that. - ziggy300zx 12:39:19 05/03/12 That's really amazing. (n/m) - njz 12:57:33 05/03/12 Intriguing, standard JWT ecu + the wet shot? - samsung-Z [Houston] 13:17:47 05/03/12 Re: Intriguing, standard JWT ecu + the wet shot? - ziggy300zx 15:11:06 05/03/12 I have a customer/friend that has a similar set up - JDAVE 13:38:03 05/03/12 Nice Z. What wheels are those? - SleeprZ 13:54:57 05/03/12 did you retard the timing, and what plugs are you running? - sonazty 18:51:04 05/03/12 Re: did you retard the timing, and what plugs are you running? - ziggy300zx 21:35:29 05/03/12 Props to you using copper plugs on a n20 application - KongZTT GT28RS MD 00:33:48 05/04/12 **such an inexpensive** I mean (n/m) - KongZTT GT28RS MD 00:38:44 05/04/12 Re: **such an inexpensive** I mean - ziggy300zx 08:48:21 05/04/12 thats why I run the coppers as well! $3 plug, or 5k+ motor.. - marklar182 09:33:54 05/04/12 Yep.. I ran them on my TSI talon.. 30psi of boost.. - KongZTT GT28RS MD 14:57:40 05/04/12
Post a Followup	You cannot reply to this message because you are not logged in.