Subject	Before I send this car off the to the junk yard are there
Posted by	Evan(CA) on April 21, 2012 at 3:51 PM
	This message has been viewed 932 times.
Message	any other parts I should pull. It's a 90 automatic ~140k NA with a blown trans and a motor that did run but knocked like crazy. The junk yard will give me 195 bucks and haul it away as long as the motor and transmission are in the car running or not. That's why I didn't bother pulling the plenum or really dive the motor. I pulled everything in good useable shape but if you see anything I missed let me know. Thanks. If anyone needs any brackets, nuts bolts etc you can see in the pics you can have them for the price of shipping so long as it isn't too much work to get them off. Before anyone asks, the interior is stripped, the fenders are dented, the spoiler is rotted, and the hatch is rusting. The glass is decent but in my experience it hasn't been worth my time removing the glass and storing carefully for a year only to make 50 bucks. Also are driveshaft rebuildable and worth saving? I know z1 gives core credit but only on TT shafts. Anyways if you see anything you want let me know. This will be gone in a week to make room for my next project car. Thanks!!
Follow Ups	Before I send this car off the to the junk yard are there - Evan(CA) 15:51:19 04/21/12 at a glance... - Adam (NoVA) 16:16:16 04/21/12 There are a lot of parts worth salvaging - s3trios 16:23:10 04/21/12 Well... - Evan(CA) 16:46:39 04/21/12 Re: Well... - Adam (NoVA) 21:45:05 04/21/12 You're doing it wrong... - Bernie (NoVA) 20:51:02 04/22/12 Was that Robo's car? - Evan(CA) 23:13:30 04/22/12 No - but I don't really understand the logic you're appling - Bernie (NoVA) 10:51:45 04/23/12 Well had it been Robo's Car my thinking was that was - Evan(CA) 15:55:17 04/23/12 Also, a lot of little stuff u wont get much for. - ZXoltan 16:25:51 04/21/12 Should that CAS have any in-out play? - Evan(CA) 16:54:30 04/21/12 Might work, but I wouldnt run it on my own car - ZXoltan 06:43:51 04/22/12 If you can get to it I could use - Jayru 16:37:24 04/21/12 Catalytic converters. (n/m) - 240Z FeO2 17:47:46 04/21/12 Most of the under carriage has been stripped. - Evan(CA) 17:51:56 04/21/12 Heat shield over trans. Do want - BlackholeZ 02:35:46 04/22/12 I'd buy the n/a speed sensor on the trans. (n/m) - treese88 18:19:48 04/21/12 IGNORE ME! Just realized it is auto...duh. (n/m) - treese88 18:39:53 04/21/12 CAS, gauge cluster, ECU. (n/m) - DVDBURN (MD) 19:04:51 04/21/12 I've removed just about everything I didnt take a pic of. - Evan(CA) 19:17:01 04/21/12 That sounds kinda sloppy. May still work ok when mounted - DVDBURN (MD) 21:13:35 04/21/12 I would say doors and hatch if they're not bent. (n/m) - AsaHerring 19:32:36 04/21/12 Vultures.... z32 style with an eye for easy pickin's (n/m) - Gordo 93TT Daytona 21:32:37 04/21/12 ill take the spoiler if you can get it off (n/m) - 4Zwin 00:58:16 04/22/12 Would you happen to have both gauge pods? - cHiNgLeZ 01:28:40 04/22/12 spoilers doors and t tops have value alone - Dane (Houston) 01:55:58 04/22/12 Cut out the body harness from fender to fender... - PiotrC70 10:33:58 04/22/12 *don't* cut body harnesses - remove them whole & intact - Bernie (NoVA) 10:56:55 04/23/12 yep, it would take me years to check out Ashley's - vorpalZ 13:53:32 04/23/12
Post a Followup	You cannot reply to this message because you are not logged in.