Subject	2nd. Wilwood is smaller.
Posted by	MixManMash on April 21, 2012 at 8:22 AM
	This message has been viewed 222 times.
In Reply To	Wilwood is not Stoptech. You will need the 5mm spacer. (n/m) posted by 300twinz (satx) on April 20, 2012 at 07:54 PM
Message	The issue with RPF1s is two fold: 1. Spoke design doesn't give a lot of caliper clearance. 2. On the inside of the wheel, closer to the spokes, they have the knobs sticking out all along the circumference.
Follow Ups	Stoptechs+Rpf01s - Jeffblue 10:52:47 04/20/12 I had the RPF1 18x9.5 +38 with Stoptech and cleared - 300twinz (satx) 11:21:10 04/20/12 . - ZiNnYc 12:18:30 04/20/12 opps: Stoptechs+FN01RCs - Halo TTZ 12:33:48 04/20/12 You have FN01RC's? Hate you. (n/m) - CoHPhasor 17:14:02 04/20/12 I would be interested to know the answer to this as well as - MixManMash 13:14:06 04/20/12 Well, when i measure i'll let you know (n/m) - Jeffblue 16:09:51 04/20/12 What I'm running... - Hawkin"Z" 18:09:33 04/20/12 Thanks a lot, thats some good information (n/m) - Jeffblue 19:52:09 04/20/12 Wilwood is not Stoptech. You will need the 5mm spacer. (n/m) - 300twinz (satx) 19:54:12 04/20/12 2nd. Wilwood is smaller. - MixManMash 08:22:18 04/21/12 I'm fine with the 5mm spacer, just dont want to go to a 10mm - Jeffblue 02:37:11 04/22/12
Post a Followup	You cannot reply to this message because you are not logged in.