Subject	Stoptechs+Rpf01s
Posted by	Jeffblue on April 20, 2012 at 10:52 AM
	This message has been viewed 465 times.
Message	I'm planning to upgrade my brakes to the stoptech ST-40 and St-22 calipers with the 2 piece aerorotors. I have 17x9.5 et38mm enkei RPF01's on my 300zx on all four corners, i'm running a 5mm spacer up front and with that i clear the stock brakes by about the thickness of a credit card. Is anyone running stoptech 332/328mm brake kit with these wheels or does anyone have any insight as to whether or not they do or do not clear with the 5mm spacer?
Follow Ups	Stoptechs+Rpf01s - Jeffblue 10:52:47 04/20/12 I had the RPF1 18x9.5 +38 with Stoptech and cleared - 300twinz (satx) 11:21:10 04/20/12 . - ZiNnYc 12:18:30 04/20/12 opps: Stoptechs+FN01RCs - Halo TTZ 12:33:48 04/20/12 You have FN01RC's? Hate you. (n/m) - CoHPhasor 17:14:02 04/20/12 I would be interested to know the answer to this as well as - MixManMash 13:14:06 04/20/12 Well, when i measure i'll let you know (n/m) - Jeffblue 16:09:51 04/20/12 What I'm running... - Hawkin"Z" 18:09:33 04/20/12 Thanks a lot, thats some good information (n/m) - Jeffblue 19:52:09 04/20/12 Wilwood is not Stoptech. You will need the 5mm spacer. (n/m) - 300twinz (satx) 19:54:12 04/20/12 2nd. Wilwood is smaller. - MixManMash 08:22:18 04/21/12 I'm fine with the 5mm spacer, just dont want to go to a 10mm - Jeffblue 02:37:11 04/22/12
Post a Followup	You cannot reply to this message because you are not logged in.