Subject	biggest thing on rebuilding engines properly is measurements
Posted by	sandmanz32 on March 13, 2012 at 10:18 PM
	This message has been viewed 152 times.
In Reply To	engine building posted by nissan300zxwork on March 13, 2012 at 09:26 PM
Message	Make sure you measure EVERYTHING! Twice, 3 times, 4 times if you have to. The esm is your friend. Take your time, be patient, clean, and meticulous with your measurments. Make sure you have a proper torque wrench as well, a lot of things like the heads, main cap, cams, lower plenum have to be tightened in steps to specific torque values or they will warp. You seem intelligent, so it shouldnt be too big of an issue for you. More of a "nerves" thing. believe me we have all been there on our first O/H. Maybe not while assembling, but definately on the first start lol. ......And just as they're about to catch me.....Twin......Turbos......Kick.......In!
Follow Ups	engine building - nissan300zxwork 21:26:16 03/13/12 You have a good attitude about it.. - KongZTT GT28RS MD 21:37:08 03/13/12 Re: You have a good attitude about it.. - nissan300zxwork 21:50:33 03/13/12 If you can't find a vg block locally to toy around with.. - KongZTT GT28RS MD 21:55:47 03/13/12 biggest thing on rebuilding engines properly is measurements - sandmanz32 22:18:06 03/13/12 also.. some years of FSM are incorrect about Tq specs. - KongZTT GT28RS MD 22:41:26 03/13/12 You are correct, also if using arp hardware use their specs. (n/m) - sandmanz32 12:05:19 03/14/12 3rded on the FSM. The Nissan FSM is one of the best - Ash's Z 01:41:29 03/14/12 Re: 3rded on the FSM. The Nissan FSM is one of the best - Krazyd27(Houston) 09:05:01 03/14/12 Re: 3rded on the FSM. The Nissan FSM is one of the best - nissan300zxwork 10:04:59 03/14/12
Post a Followup	You cannot reply to this message because you are not logged in.