| Message |
This is how i do it. Im sure there are other ways, but this way takes me roughly 6 hours. Discharge the a/c, remove the plenum, remove the glove box, remove the evaporator box, pull the ecu and bulk connector through the firewall. Using a quarter inch ratchet with a med depth 10mm, some patience,and a ratcheting wrench, remove all of the heat shields and retaining brackets off of the firewall. Disconnect remaining connectors and chuck it in the floor, have a beer, reverse!
......And just as they're about to catch me.....Twin......Turbos......Kick.......In!
|
 |