TwinTurbo.NET: Nissan 300ZX forum - Staggered Wheels
People Seeking Info
 
   


     
Subject Staggered Wheels
     
Posted by Tanley on January 25, 2012 at 11:50 AM
  This message has been viewed 328 times.
     
In Reply To Staggered Wheels posted by Tanley on January 24, 2012 at 08:29 PM
     
Message So I plugged everything in to the wheel/tire calculator and here is what came back.

Front:

-Package is 5 mm (0.2'') closer to suspension/brakes components. Acceptable for most cars.
-Package will stick out 35 mm (1.4'') farther. Make sure that you have enough room under the fender. If not, consider narrower tires or higher offset.
-Will fill out the wheelwell by extra 6 mm. Acceptable for most cars.

Rear:

-Package is 20 mm (0.8'') closer to suspension/brakes components. Make sure that you have enough room for that. If not, consider lower offset, narrower tires or using spacers.
-Package will stick out 20 mm (0.8'') farther. Make sure that you have enough room under the fender. If not, consider narrower tires or higher offset.
-Will fill out the wheelwell by extra 16 mm. Make sure that you have enough room under the fender. If not, consider lower profiles or smaller rims.

Acceptable? Will it fit with no rubbing? Also is 1.4" going to look stupid sticking out further? I don't want it to look like a roller skate.

-Tanley

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.