Subject	They posted measurements on their website after I called:
Posted by	Spectrum (WI) on January 10, 2012 at 4:31 PM
	This message has been viewed 305 times.
In Reply To	I also just found these from Megan Racing posted by Spectrum (WI) on January 10, 2012 at 12:09 PM
Message	He posted this image today: Bushing with measurements I am not sure if he used a caliper to measure. The diameter is close when you compare the dimension on whiteline's website. Whiteline -Diameter = 66.3mm -I.D. = 22.3mm -Height = 76.6mm (not sure if the height is accurate because they don't draw it out specifically where they are measuring from, do they measure just the metal part with or without the extra coming out the top of the bushing, don' know) Megan Racing -Diameter = 65mm -I.D. = 22mm -Height = 60mm (height measurement appears like he just looked at the metal section of the bushing without the extra coming out either end) It also looked like he rounded to the nearest mm which would make the measurements questionable. According to his measurements there could be 0.050" difference in diameter. I'm not sure if these measurements are apples to apples. Bernie mentioned that they are not the same on the 240sx/Silvia. I am curious how different they really are. I wonder if he has a subframe from a 240sx to compare? food for thought look at this. This place claims their bushings can work for the Z32 and 240sx. This may be a typo but it is interesting. La-Z-Link
Follow Ups	Has anyone installed Whiteline's Subframe Bushings? - Spectrum (WI) 22:28:15 01/09/12 they do LOOK close to OEM - Shiers69 23:28:25 01/09/12 new frame from Nissan is $600+ (n/m) - Bernie (NoVA) 00:01:40 01/10/12 I thought someone just posted that they got one for ~$400 (n/m) - Shiers69 12:46:00 01/10/12 fwiw, I've got NISMO subframe bushings and they look stock - aliaZ 23:43:30 01/09/12 do they still allow the subframe to "float"? (n/m) - LJZTT 09:41:08 01/10/12 yes, but not like the OEM bushings - aliaZ 10:40:28 01/10/12 look identical to OEM stock (n/m) - LJZTT 11:42:22 01/10/12 Nismo had Z32 application bushings? I have only - Bernie (NoVA) 10:54:58 01/10/12 they've been discontinued for several years (n/m) - aliaZ 18:50:40 01/10/12 They don't solid mount the frame like the ES units. (n/m) - Bernie (NoVA) 23:59:08 01/09/12 have you installed them? - aliaZ 06:12:45 01/10/12 no. (n/m) - Bernie (NoVA) 10:55:25 01/10/12 I also just found these from Megan Racing - Spectrum (WI) 12:09:35 01/10/12 I called them and asked to measure the bushings - Spectrum (WI) 12:19:55 01/10/12 S13/s14 and R32/33/34 are not the same as z32 (n/m) - Bernie (NoVA) 12:58:35 01/10/12 correct - I've got a set of the S13 nismo bushings - aliaZ 18:52:23 01/10/12 They posted measurements on their website after I called: - Spectrum (WI) 16:31:15 01/10/12 Just gave SPL a call about it. - Spectrum (WI) 17:00:11 01/10/12 I think unless it's a floating design like stock with - Wright (Ca) 17:52:37 01/10/12 I dont remember what a stock one looks like - Spectrum (WI) 18:59:24 01/10/12
Post a Followup	You cannot reply to this message because you are not logged in.