Subject	Re: Just did mine
Posted by	300ZMang on January 06, 2012 at 7:30 AM
	This message has been viewed 103 times.
In Reply To	Just did mine posted by MalcS on January 05, 2012 at 07:56 PM
Message	How long did it take you for your first time? I'm not sure about the by-pass with the plenum on... I'm assuming if it was possible many other people would do it instead of removing everything. It would be nice to remove all the "extra" junk in there though.
Follow Ups	TB Coolant By-pass.... - 300ZMang 08:07:05 01/04/12 1st time plenum pull on a stock Z32 is a chore. (n/m) - Bernie (NoVA) 08:09:47 01/04/12 I have an N/A engine in my garage in which I pulled - 300ZMang 08:13:27 01/04/12 I used colored electrical tape my first time and made sure - HighPsi (NorCal) 08:36:54 01/04/12 As long as you can be methodical, the project just takes - zgene4 09:29:01 01/04/12 Thanks for that pointer! (n/m) - 300ZMang 09:37:24 01/04/12 I used this Tech for Plenum Pull and Coolant By-pass.... - Gordo 93TT Daytona 09:53:30 01/04/12 4 to 8 hour job - s3trios 11:02:02 01/04/12 I wish I had the GearWrench Flex Head wrenches - Ahmed (Chicago) 11:35:27 01/04/12 I have stock injectors yes.... - 300ZMang 12:23:07 01/04/12 The camera is your friend. (n/m) - DVDBURN (MD) 13:03:46 01/04/12 Baggies, markers, camera, and sticky strips to place >>> - ZUL8TR 15:34:28 01/04/12 How does one do the closed loop test? - ChrisMedaris 15:47:05 01/04/12 I use motor oil to lube the o-rings. - Wright (Ca) 18:13:27 01/04/12 I use Vaseline for the injectors. The fuel will dissolve it. (n/m) - Woody75 (Denver) 10:11:23 01/05/12 100% agree. Works much better than motor oil. (n/m) - Mike TDK (NoVA) 10:19:09 01/05/12 Firstly, post in Tech, second... - CoHPhasor 23:21:52 01/04/12 Just did mine - MalcS 19:56:38 01/05/12 Re: Just did mine - 300ZMang 07:30:17 01/06/12
Post a Followup	You cannot reply to this message because you are not logged in.