| If you are going to have it installed which I highly recommend make sure you ask before they install. If they solder all connections and dont cut any wires that must not be cut. I say this simply because if you ever have problems with it and/or decide to take it out that you dont have a big head ache. I just had to go thru a older viper alarm that had been solder in with a lot of extra add on and it was a big head ache. Hopefully you have a automatic if you are looking to get remote start. The one that I have and was working on has remote start on a 5sp and that is illegal in most if not all state. The reason for this one being such a head is that it was installed with the peace of mind that you are not having to worry about ever coming out and your car has been stolen! Some installer do to what I refer to what I call car alarm installer signature. (This is where the changing of a color or two wire is done to confuse anyone that did not install the alarm) I have seen where a Python Alarm was installed on a Mitsubishi Eclipse and the installer had used all black color wires and that was a nightmare. So pay the little extra for better quality alarm install and as long as you have not problem with the devise the you should be good. And be sure to have a REPUTABLE installer that has been in busy for a long time install the alarm. Good luck and long live the Z32!
|