Subject	MOAR! Built RB Z progress fabrication Ch 2
Posted by	91300zxttkid on December 20, 2011 at 11:01 AM
	This message has been viewed 917 times.
Message	Not sure where I left off with pictures.. But We are making a whole new oil pan from scratch using 6061 Grade Aluminum.. Also the Exhaust manifold is finally fully welded up, I need to attack the ports with a grinder and sand it smooth. In the process right now of making the custom length Oil feed/return and water feed/return lines for the turbo. The 4 inch downpipe is welded up.. and the Radiator is fully mounted in the car.. It's getting closer!!! Got new Roller and timing belt tensioner Need to cut throttle body down and welded aluminum Vband and Vibrant VAN JAN assembly to it, mount fmic and fab intercooler piping.. weld 90 degree elbow onto compressor of turbo. I have my full fuel system for now.. I pumped out all the old gas from the tank with an audi 1.8t pump lol I am running the stock fuel pump for now just to get it started.. I got a new fuel pump filter sock to go on the pump as well as you can see in the pic the old one looks pretty worn More updates to come after the holidays! Thanks for looking. -George
Follow Ups	MOAR! Built RB Z progress fabrication Ch 2 - 91300zxttkid 11:01:08 12/20/11 Awesome! I love seeing people build their own parts (n/m) - Rob'Z 12:17:46 12/20/11 The turbo you are using, is it a secret? (n/m) - toykoz32 13:47:25 12/20/11 Im not even 100% sure, I know its a CT3B Comp Turbo - 91300zxttkid 14:48:33 12/20/11 Beautiful! (n/m) - sak01 13:59:18 12/20/11 I like the manifold...pretty impressive. (n/m) - Wright (Ca) 15:52:37 12/20/11 Re: MOAR! Built RB Z progress fabrication Ch 2 - Zesus 16:30:41 12/20/11 Body paint my goal is to be BMW Alpine White.. - 91300zxttkid 17:56:45 12/20/11 Curiosity but.... - BOOZTD 3 21:33:14 12/20/11 Not all, 2+0's have drainplugs in fuel tank, 2+2 do not (n/m) - CoHPhasor 22:36:21 12/20/11 Yes, great work! - diamond20601 22:14:45 12/20/11 Is the trans in? (n/m) - John (MD) 18:46:12 12/21/11 Curiosity but.... - BOOZTD 3 22:17:03 12/20/11 True (n/m) - John (MD) 18:45:08 12/21/11 Thats a nice welding table you have there... - MPV TT 00:27:34 12/21/11 IIRC - AC is only for Aluminum, DC for carbon/stainless - Jayru 08:43:29 12/21/11 awesome! (n/m) - eazyez 04:20:12 12/21/11 Very cool! Ideas on what you're looking for power-wise? (n/m) - zfreak(Dallas) 20:24:16 12/21/11
Post a Followup	You cannot reply to this message because you are not logged in.