Subject	Turbos smoking and oil restrictors.
Posted by	sparkie on October 26, 2011 at 5:11 PM
	This message has been viewed 170 times.
Message	Anyone knows a source that sells oil restrictors in -4AN male to female joint connector? In about 0.040" size? I have about 100psi of oil pressure on cold starts with 20W50 oil and about 40psi warmed up at idle. I think this is causing too much oil in the turbos for the gravity drain that oil is leaking past the seals and causes my smoking issue. The CHRAs have built-in restrictors. But I'm not sure about the size. Might be too big for this oil pressure. Another thing is that my setup with -4AN feed line and inline filters is definitely too big and flows much more oil than the turbos can drain out. Any thoughts and similar experience? www.ztechz.net ICQ # 14337317
Follow Ups	Turbos smoking and oil restrictors. - sparkie 17:11:50 10/26/11 Look up parker's XHX7 part numbers. - kkrofft (OH) 08:35:28 10/27/11 I believe the standard is 0.035 - ZiNnYc 12:10:12 10/27/11 You can get them from many of the turbo suppliers or from Z1 - ZXoltan 14:26:47 10/27/11 sparkie =/= stock turbos (n/m) - ZiNnYc 15:54:50 10/27/11 Scroll to bottom of this link, this helped a lot - Turbodog (CT) 06:01:56 10/28/11
Post a Followup	You cannot reply to this message because you are not logged in.