Subject	Issues w/ oil and coolant lines on GT2860RS/GT675RS >>>
Posted by	my91z on October 16, 2011 at 8:38 PM
	This message has been viewed 840 times.
Message	So I got my driver's side turbos installed fine and am trying to get the passenger side mounted, but I'm having trouble with the oil feed line interfering with one of the coolant lines. It seems like the coolant line wants to run directly over the oil inlet port in its natural state, but it can't. When I install the oil line first, the coolant line touches the oil line in two places. And, it doesn't want to move over enough to line up with the hose on the back of the engine. Am I missing something, or do I need to bend the coolant line? I don't recall reading about ppl having an issue like this with any of the Garrett BB turbos, so starting to wonder what's going on. Thanks, Mike --------------------------------------------------------
Follow Ups	Issues w/ oil and coolant lines on GT2860RS/GT675RS >>> - my91z 20:38:17 10/16/11 Mine were the same . I tightened up the coolant line - Xteam300TT (South Tx ) 00:35:08 10/17/11 Here is my Passenger side. Doesn't look like yours. - Boosted1 06:15:02 10/17/11 Don't have a close up of Drivers side, but it took some work - Boosted1 06:21:16 10/17/11 Oops, I mispoke, it is the driver's side I'm having issues > - my91z 07:21:14 10/17/11 This is what mine looked like too.... - Madhatter10-6 07:05:52 10/17/11 Here is a pic..... - Madhatter10-6 07:20:53 10/17/11 Same issue here - ConVerTT 07:53:42 10/17/11 I gotta say that the camera you have is pretty much awesome! (n/m) - TheSlimOne 08:54:46 10/17/11 Play with the coolant lines, theyll fit (n/m) - ZiNnYc 11:19:50 10/17/11 I've tried for a long time, I don't see how. - my91z 11:28:07 10/17/11 Thats what I mean. - ZiNnYc 16:38:19 10/17/11 does your Z run yet? (n/m) - aliaZ 05:54:05 10/18/11 No numbers, not statesside yet... (n/m) - ZiNnYc 07:33:46 10/18/11 Yup - team7 16:46:58 10/17/11
Post a Followup	You cannot reply to this message because you are not logged in.