TwinTurbo.NET: Nissan 300ZX forum - AEM recommends them be more downstream~
People Seeking Info
 
   


     
Subject AEM recommends them be more downstream~
     
Posted by BoneZ (MD) on September 03, 2011 at 12:34 PM
  This message has been viewed 320 times.
     
In Reply To Widebands can't be run in the OEM location though, right? (n/m) posted by BigTDogg (MA) on September 03, 2011 at 11:53 AM
     
Message "If you anticipate high EGT's (over 800C), run a turbocharger, run at high RPM for extended periods of time or plan on running leaded race fuel then you must mount the sensor at least 36 inches or more downstream of the exhaust port as all of these can cause the sensor to overheat."

[ http://www.schnitzracing.com/manuals/AEMWBK.pdf ]

Otherwise, "Mount the O2 sensor in the exhaust system at least 18 inches downstream from the exhaust port."

-___________________________________________________________-

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.