 Makes adapting a Wilwood compact clutch master simple.
Must remove rod and rubber boot from Wilwood and reinstall C clip which takes about a minute. Can be used with .700" (11/16") Wilwood compact style master to allow quicker/fuller release of the clutch. Couple this with the HD cast iron clutch fork kit and shifts are so freaking amazingly easy and fast. Just tap the clutch pedal and shifts just happen. In my approximations this will reduce travel required to release the clutch by about 20% Can also use the stock size 5/8" wilwood master. I am going to test fit a Tilton master here shortly but it should work without issue as they are almost identical dimensions as the Wilwoods.
www.Zspeedperformance.com “Better to remain silent and be thought a fool than to speak out and remove all doubt.” |
New stuff - 
