Subject	Had the same issue.....Try this.
Posted by	TTZ2NV(TX) on June 22, 2011 at 7:00 PM
	This message has been viewed 225 times.
In Reply To	Youre supposed to clock the recirc pipe. (n/m) posted by ZiNnYc on June 22, 2011 at 06:24 PM
Message	I haven't mounted them yet, but I called Kyle at conceptZ and he let me know of a gates hose 25253 which is flexible enough to go from the smaller port on the recirc valve to the smaller diameter hole which is facing down on the pipe(s) that run under the headlights. I'm assuming you'll retain the larger hose from the stock setup. Good luck and hope it works out for ya.
Follow Ups	How are people mounting their BOVs or Recircs with 2.5" IC - MixManMash 17:47:38 06/22/11 I haven't actually stated the problem... - MixManMash 17:50:06 06/22/11 Hope you get this figured out - ubermiach 18:06:14 06/22/11 I don't know what you mean by planar filter, but have you - zgene4 18:14:41 06/22/11 Planar filter - you don't need the elbows and you can use - MixManMash 19:22:58 06/22/11 Youre supposed to clock the recirc pipe. (n/m) - ZiNnYc 18:24:45 06/22/11 Had the same issue.....Try this. - TTZ2NV(TX) 19:00:51 06/22/11 Thanks. I believe your suggestion will work. - MixManMash 19:32:31 06/22/11 That is what I used, worked perfectly. (n/m) - HighPsi (NorCal) 20:27:28 06/22/11 Ha! I was working on this last night with stock recircs :) (n/m) - sak01 20:56:45 06/22/11 I re-clocked the stock recircs (n/m) - BoneZ 22:19:24 06/22/11
Post a Followup	You cannot reply to this message because you are not logged in.