Subject	okay i just tested it again and..
Posted by	pearlzed(toronto) on May 16, 2011 at 6:15 PM
	This message has been viewed 170 times.
In Reply To	Fundamentally flawed posted by CoHPhasor on May 16, 2011 at 03:37 PM
Message	same results. i did what RVAZ said to do, put a piece of boost hose down there, and all it did was solidify my findings really... there is definitely air blowing right though there from this boost leak test (pressurizing intake)
Follow Ups	Can anyone identify this ?! - pearlzed(toronto) 19:28:55 05/15/11 EGR hardline (n/m) - Draker (Eugene, OR) 19:35:29 05/15/11 its beside the hardline... to the right in the pic - pearlzed(toronto) 19:44:59 05/15/11 Re: Can anyone identify this ?! - plumwerks 19:36:21 05/15/11 Goes to the pcv valve ? (n/m) - whip 21:12:17 05/15/11 Is this what you are talking about? - Joe@ZSpeedperformance 22:05:37 05/15/11 yes! thats what is leaking ! (n/m) - pearlzed(toronto) 22:29:38 05/15/11 Yup, just a valve cover. Could have cracked when someone - Milo (SATX) 23:07:29 05/15/11 since ive had the z the engine has never been pulled - pearlzed(toronto) 23:50:07 05/15/11 It's really not that big of a deal. - Joe@ZSpeedperformance 01:22:38 05/16/11 well i cant pressureize my intake at all with my tester - pearlzed(toronto) 11:48:29 05/16/11 Are you sure its not a leaking PCV hose or valve? - Joe@ZSpeedperformance 12:56:02 05/16/11 2 sets of eyes say that the leak is coming from there - pearlzed(toronto) 13:44:06 05/16/11 Here is what it looks like back there - Joe@ZSpeedperformance 13:56:38 05/16/11 Maybe it's the PCV pipe that's cracked(?) (n/m) - Barry (NJ) 15:11:43 05/16/11 That's what were thinking, He supposed to check it later. (n/m) - Joe@ZSpeedperformance 17:18:00 05/16/11 I would get a mirror - Draker (Eugene, OR) 14:05:37 05/16/11 If you haven't already, spray some soapy water - RVAZ 15:02:43 05/16/11 Fundamentally flawed - CoHPhasor 15:37:03 05/16/11 okay i just tested it again and.. - pearlzed(toronto) 18:15:33 05/16/11 btw just re read what you said AND - pearlzed(toronto) 18:34:49 05/16/11 I believe that is normal - RVAZ 10:52:29 05/17/11 This is wrong, The ONLY way air can get into the - Joe@ZSpeedperformance 20:56:19 05/17/11
Post a Followup	You cannot reply to this message because you are not logged in.