Subject	sounds like overspray...
Posted by	TeddyZ(SFC) on April 05, 2011 at 11:42 AM
	This message has been viewed 292 times.
In Reply To	Paint issues posted by aquariuscsm on April 05, 2011 at 11:17 AM
Message	when they paint a car, they USUALLY cover whatever isn't being painted to keep this from happening... doesn't seem to be the case here. Your options are as follows: 1. STOP taking your Z to paint shops that don't know how to spot repair the paint without messing up the rest of the car. 2. take it back to them and have them fix it or take it to someone else... they should be able to polish it out. if the rough texture is just on the clear coat, you should be able to polish it out... you can also do it yourself, but if you don't know what you're doing or have the right tools, there's a very good chance you'll bone the paint...
Follow Ups	Paint issues - aquariuscsm 11:17:43 04/05/11 If you don't like it, take it back. (n/m) - Draker (Eugene, OR) 11:31:52 04/05/11 Take it back... (n/m) - rave 11:32:42 04/05/11 Sounds like overspray - iceman601 11:35:09 04/05/11 sounds like overspray... - TeddyZ(SFC) 11:42:25 04/05/11 You should be able to buff that stuff out. (n/m) - sak01 12:07:43 04/05/11 why should he? - 96300NAZ 12:10:10 04/05/11 it should be fixed by the shop - dpjax 12:31:35 04/05/11 absolutely take it back (n/m) - JRFITZ 12:55:35 04/05/11 overspray, needs wet sanding. (n/m) - BannonZ 13:05:56 04/05/11 overspray can often be removed in less destructive ways - Antihero 16:02:18 04/05/11 2nd (n/m) - KongZTT GT28RS MD 16:08:11 04/05/11 I agree, but sometimes clay bars can be riskier on fresh - BannonZ 17:58:55 04/05/11 yeah - Antihero 18:59:18 04/05/11 How much was the paint job? (n/m) - John@Z1 13:18:37 04/05/11 Good question. (n/m) - not4resaleZ 13:33:35 04/05/11 Re: Paint issues - aquariuscsm 13:51:13 04/05/11 just for asking the question after I spent 5 minutes with - Cap927(Boston) 13:57:14 04/05/11 Huh? (n/m) - aquariuscsm 14:01:30 04/05/11 joke, here is what I would do.......................... - Cap927(Boston) 14:02:27 04/05/11 also try wetsanding by hand with 2000 grit paper, but again - Cap927(Boston) 14:04:51 04/05/11 ^^^ this is the correct answer you could have this fixed - 5280Z_nightstalker 15:24:21 04/05/11 That's a big IF ;~) (n/m) - Barry (NJ) 15:57:26 04/05/11 And if he doesn't know what he's doing, the shop won't fix - black300zx 22:24:02 04/05/11 Yeah, IMHO that's unacceptable. (n/m) - BigTDogg (MA) 11:31:22 04/06/11 If.. - Gromit 15:58:54 04/05/11 Clay Bar wMeguires spray detailer > Wax> Done. - Firstgearlaunch(Atlanta) 17:52:26 04/05/11 maybe. see others' comments above. (n/m) - Gromit 15:42:31 04/06/11
Post a Followup	You cannot reply to this message because you are not logged in.