Subject	Well, it looks like the front oil seal>>>
Posted by	MAXWARP on July 05, 2001 at 9:07 PM
	This message has been viewed 57 times.
In Reply To	I'll cancel your griffin one then Rich :) >> posted by elizium on July 05, 2001 at 06:46 PM
Message	The one that the crank come through not the gaskets or silicone seals I made. I think I can change it without to much trouble. I got the leak detection fuild and light from my friend Pat. Man it pointed me right to the source. Only trouble was I had to drain the radiator, pull the water pipes to remove the timing covers, pulled all the belts, fan, etc. I wanted to make sure I could see to the valve covers and all around the oil pump. Tommorrow I pull and drain all over AND MY engine gasket kit has a new frount oil seal thank you very much, so we will see. Regards, Rich 1990 TT STAGE VII
Follow Ups	Check this out if you need an Aluminum Radiator (lots pics) - FNFASTZTT 18:10:28 07/05/01 Sweet..I'm interested..what about caps, and can you use >> - wesman [92TT-less ] 18:15:37 07/05/01 You can use the stock hoses but u will need a large cap -> - FNFASTZTT 18:36:45 07/05/01 nice pics... do you have any of the underside too? (n/m) - elizium 18:18:20 07/05/01 The bottom? Let me know what angle you want -> - FNFASTZTT 18:32:39 07/05/01 Just want to see the mounting pegs etc.. maybe>>> - elizium 18:37:13 07/05/01 Here is another shot of one of the bottom pegs -> - FNFASTZTT 18:46:36 07/05/01 Cool. Keep us posted! (n/m) - MikeM317 (Boston) 18:27:56 07/05/01 pun intended? :-) (n/m) - toyluvr 18:38:38 07/05/01 lol *not intended!* lol! (n/m) - MikeM317 (Boston) 20:43:01 07/05/01 jeezo. Leave it to an engineer........ - toyluvr 18:34:01 07/05/01 We have to get a sample from an auto and -> - FNFASTZTT 18:41:17 07/05/01 you are correct about the stock configuration. Thats - toyluvr 18:45:38 07/05/01 Definately. First "mod" on my car was an aftermarket cooler! (n/m) - SeedyRom 19:38:27 07/05/01 Looks like Griffin Radiator just lost out, eh Turbodog (n/m) - MAXWARP 18:44:33 07/05/01 I'll cancel your griffin one then Rich :) >> - elizium 18:46:03 07/05/01 Well, it looks like the front oil seal>>> - MAXWARP 21:07:56 07/05/01 Do you think you might have had a defective PCV valve? - Turbodog (CT) 22:04:32 07/05/01 They're new, but might be worth testing,wouldn't suprise me (n/m) - MAXWARP 04:34:35 07/06/01 Yeah, cancel it, I didn't like his -tude anyway (n/m) - MAXWARP 21:10:10 07/05/01 Heh, I told them there are other optons out there - Turbodog (CT) 20:11:45 07/05/01 why didnt they go with a triple core? (n/m) - 97 S14 18:48:55 07/05/01 I talked with them at length about that very subject -> - FNFASTZTT 19:00:11 07/05/01 Looks promising! (n/m) - StEaMyZ(ZtoyZ.NET©) 18:55:43 07/05/01 I don't mean to be rude here, but... - SeedyRom 19:36:27 07/05/01 Thanks for the endorsement Seedy! :-) - FNFASTZTT 19:52:11 07/05/01 Re: Thanks for the endorsement Seedy! :-) - SeedyRom 19:59:46 07/05/01 Some questions - Good2Zya 20:27:38 07/05/01 Here are my readings on my custom radiator... - SeedyRom 20:46:56 07/05/01 P.S. I drive my car to redline ALL DAY LONG :) - SeedyRom 20:49:31 07/05/01 Some answers - FNFASTZTT 21:49:39 07/05/01 And you have me to thank for introducing the Howe:) (n/m) - MikeH(Phoenix) 21:29:40 07/05/01 That is an excellent price . To have a custom all aluminum - MikeH(Phoenix) 21:33:45 07/05/01 Goodbye Griffin.. :) hello new radiator.. put me in for one. (n/m) - elizium 21:36:11 07/05/01 The shroud makes a big difference up to 10 degrees (n/m) - MikeH(Phoenix) 21:37:44 07/05/01 I am hoping to have proof of that tomorrow. Stay tuned! (n/m) - FNFASTZTT 21:51:36 07/05/01
Post a Followup	You cannot reply to this message because you are not logged in.