Subject	Some questions
Posted by	Good2Zya on July 05, 2001 at 8:27 PM
	This message has been viewed 82 times.
In Reply To	Check this out if you need an Aluminum Radiator (lots pics) posted by FNFASTZTT on July 05, 2001 at 06:10 PM
Message	Just to be sure, these reading were taken during the day with OAT of 110 degrees correct? You could have done it at night. I'm not flameing you, just asking. (2)Was that with or without the A/C on? Was that 215 degree reading in traffic? Was the A/C on or off?, or was it on the highway? For your temp readings to be meaningful you have to tell us what the specific conditions were. 215 with the A/C on in traffic on a 110 degree day would be good, but on the highway it would not. Fred 95 300TT SGP Stage..Who knows..lol Dynoed 539.4 RWHP, 481.2 Lbs. Torque Pump Gas @ 17 Lbs. of Boost NO NOS!!
Follow Ups	Check this out if you need an Aluminum Radiator (lots pics) - FNFASTZTT 18:10:28 07/05/01 Sweet..I'm interested..what about caps, and can you use >> - wesman [92TT-less ] 18:15:37 07/05/01 You can use the stock hoses but u will need a large cap -> - FNFASTZTT 18:36:45 07/05/01 nice pics... do you have any of the underside too? (n/m) - elizium 18:18:20 07/05/01 The bottom? Let me know what angle you want -> - FNFASTZTT 18:32:39 07/05/01 Just want to see the mounting pegs etc.. maybe>>> - elizium 18:37:13 07/05/01 Here is another shot of one of the bottom pegs -> - FNFASTZTT 18:46:36 07/05/01 Cool. Keep us posted! (n/m) - MikeM317 (Boston) 18:27:56 07/05/01 pun intended? :-) (n/m) - toyluvr 18:38:38 07/05/01 lol *not intended!* lol! (n/m) - MikeM317 (Boston) 20:43:01 07/05/01 jeezo. Leave it to an engineer........ - toyluvr 18:34:01 07/05/01 We have to get a sample from an auto and -> - FNFASTZTT 18:41:17 07/05/01 you are correct about the stock configuration. Thats - toyluvr 18:45:38 07/05/01 Definately. First "mod" on my car was an aftermarket cooler! (n/m) - SeedyRom 19:38:27 07/05/01 Looks like Griffin Radiator just lost out, eh Turbodog (n/m) - MAXWARP 18:44:33 07/05/01 I'll cancel your griffin one then Rich :) >> - elizium 18:46:03 07/05/01 Well, it looks like the front oil seal>>> - MAXWARP 21:07:56 07/05/01 Do you think you might have had a defective PCV valve? - Turbodog (CT) 22:04:32 07/05/01 They're new, but might be worth testing,wouldn't suprise me (n/m) - MAXWARP 04:34:35 07/06/01 Yeah, cancel it, I didn't like his -tude anyway (n/m) - MAXWARP 21:10:10 07/05/01 Heh, I told them there are other optons out there - Turbodog (CT) 20:11:45 07/05/01 why didnt they go with a triple core? (n/m) - 97 S14 18:48:55 07/05/01 I talked with them at length about that very subject -> - FNFASTZTT 19:00:11 07/05/01 Looks promising! (n/m) - StEaMyZ(ZtoyZ.NET©) 18:55:43 07/05/01 I don't mean to be rude here, but... - SeedyRom 19:36:27 07/05/01 Thanks for the endorsement Seedy! :-) - FNFASTZTT 19:52:11 07/05/01 Re: Thanks for the endorsement Seedy! :-) - SeedyRom 19:59:46 07/05/01 Some questions - Good2Zya 20:27:38 07/05/01 Here are my readings on my custom radiator... - SeedyRom 20:46:56 07/05/01 P.S. I drive my car to redline ALL DAY LONG :) - SeedyRom 20:49:31 07/05/01 Some answers - FNFASTZTT 21:49:39 07/05/01 And you have me to thank for introducing the Howe:) (n/m) - MikeH(Phoenix) 21:29:40 07/05/01 That is an excellent price . To have a custom all aluminum - MikeH(Phoenix) 21:33:45 07/05/01 Goodbye Griffin.. :) hello new radiator.. put me in for one. (n/m) - elizium 21:36:11 07/05/01 The shroud makes a big difference up to 10 degrees (n/m) - MikeH(Phoenix) 21:37:44 07/05/01 I am hoping to have proof of that tomorrow. Stay tuned! (n/m) - FNFASTZTT 21:51:36 07/05/01
Post a Followup	You cannot reply to this message because you are not logged in.