| Message |
adapt a 6an plug to be welded onto the steel line. though i did use 4 an on the oil feed lines simply because the restrictor fittings i've found are 4an and the steel lines are smaller for the oil a well. so for that i miss spoke, my apologies. making and adapting the lines are simple for our setups, i'll be doing an fittings for almost everything. i wish i knew how to post photos, i would show you guys what i've been doing. you can get all the fittings i've been using from aeroquip through summit, its a very top notch brand, when using medium pressure fittings on size 6 teflon stainless steel braid the line will hold over 3000psi, our systems will never see that but its what it's rated for and its easy to work with. each fitting is 3 pieces and all you need is a cut off wheel, masking tape, and some wrenches.
|
 |
