| on component. However, depending on how things go with using larger diameter tubing upstream there may be some small modification needed if you want to go with larger piping all the way back to the filters. As for the MSP inlet pipes, I know Mike has gone through a lot of work previously to try and bring upgraded inlet pipes to the community and by no means am I intending to step on his toes. I know first hand how devastating it can be to have your products knocked off by other vendors and on multiple counts to boot. For what it is worth, I think now would be a good time to clarify where I got the idea for making these turbo inlets. It wasn't as a knockoff idea spawned from Mike's inlets - I built my own turbo inlets for my "AshsZ-II" build using 2.5" mandrel bent tubing with tapers down to 2.25" at the compressor inlet back in November of 2005. Mike has pursued making them using a casting process and these new pipes I've built are sticking to the mandrel bent tubing approach.
Enthusiasts soon understand each other. --W. Irving.
Are you an enthusiast? If you are out to describe the truth, leave elegance to the
tailor.
Albert Einstein
|
