Subject	Make certain they de-gas them first. This involves
Posted by	Gordo 93TT Daytona on January 15, 2011 at 10:15 AM
	This message has been viewed 140 times.
In Reply To	Forged wheel refinishing question for metallurgists... posted by Gromit on January 14, 2011 at 07:24 PM
Message	cooking them first at about 400'F to bring out any gas bubbles. If this procedure is not performed before the paint coat, there is a risk that bubbles will rise into the powdercoating. _________________________________________________
Follow Ups	Forged wheel refinishing question for metallurgists... - Gromit 19:24:42 01/14/11 Nope.. you should be fine.. (n/m) - KongZTT GT28RS MD 20:28:19 01/14/11 Should be fine - Hyjaxe 20:44:40 01/14/11 A shop that dosen't know what they are working with can - HighPsi (NorCal) 00:04:46 01/15/11 Make sure they know what they're doing. - ArticDragon192 01:52:49 01/15/11 Thanks guys. This is why I thought I might ask first.. - Gromit 03:56:32 01/15/11 The curing process can be varied - ArticDragon192 23:17:56 01/15/11 Make certain they de-gas them first. This involves - Gordo 93TT Daytona 10:15:38 01/15/11 Any shop that does powdercoating - KongZTT GT28RS MD 11:47:56 01/15/11
Post a Followup	You cannot reply to this message because you are not logged in.