Subject	Tomei MLS gaskets
Posted by	Rob260 on January 10, 2011 at 12:02 AM
	This message has been viewed 192 times.
In Reply To	head gasket opinions from the experts.... posted by puchy on January 09, 2011 at 03:19 PM
Message	If you're doing a big rebuild you want MLS... I had a set of Cometic gaskets leak, as in not sealing betweem the layers. Yes the surfaces were prepped properly and the heads installed correctly. Replaced these with Tomei gaskets and so far so good. More expensive than Cometic but they seem to be doing the job.
Follow Ups	head gasket opinions from the experts.... - puchy 15:19:57 01/09/11 let me know what you decide to do, i'm in a similar boat - vulcanrush 16:00:57 01/09/11 yes, but I still have my doubts and one of my biggest - puchy 16:16:18 01/09/11 a few knowledgeable people, like aliaz said stock - vulcanrush 16:25:48 01/09/11 Thank you guys, I will have Cometic head gaskets.... - puchy 22:38:55 01/10/11 I believe for the cometic head gasket to work - Jim (Selin Design) 16:13:11 01/09/11 I don't think I'm qualified for that job. the smoothness - puchy 16:29:18 01/09/11 OEM - Period. (n/m) - phillyz 16:33:13 01/09/11 Are you running 88mm pistons with oem gasket or - puchy 17:17:14 01/09/11 Many have. The OEM Head Gasket works with 88 mm Pistons. (n/m) - MixManMash 20:08:31 01/09/11 OEM is fine with 88mm pistons. - nissanguyz32 21:44:53 01/09/11 Tomei MLS gaskets - Rob260 00:02:21 01/10/11 Stock = just fine (n/m) - John (MD) 13:52:00 01/10/11
Post a Followup	You cannot reply to this message because you are not logged in.