Subject	I don't think I'm qualified for that job. the smoothness
Posted by	puchy on January 09, 2011 at 4:29 PM
	This message has been viewed 105 times.
In Reply To	I believe for the cometic head gasket to work posted by Jim (Selin Design) on January 09, 2011 at 04:13 PM
Message	of my heads looks like the before picture. I think for the Cometic gaskets to really seal got to have a 50 RA or better and even at that some people have problems. That's when they have use the copper seal.
Follow Ups	head gasket opinions from the experts.... - puchy 15:19:57 01/09/11 let me know what you decide to do, i'm in a similar boat - vulcanrush 16:00:57 01/09/11 yes, but I still have my doubts and one of my biggest - puchy 16:16:18 01/09/11 a few knowledgeable people, like aliaz said stock - vulcanrush 16:25:48 01/09/11 Thank you guys, I will have Cometic head gaskets.... - puchy 22:38:55 01/10/11 I believe for the cometic head gasket to work - Jim (Selin Design) 16:13:11 01/09/11 I don't think I'm qualified for that job. the smoothness - puchy 16:29:18 01/09/11 OEM - Period. (n/m) - phillyz 16:33:13 01/09/11 Are you running 88mm pistons with oem gasket or - puchy 17:17:14 01/09/11 Many have. The OEM Head Gasket works with 88 mm Pistons. (n/m) - MixManMash 20:08:31 01/09/11 OEM is fine with 88mm pistons. - nissanguyz32 21:44:53 01/09/11 Tomei MLS gaskets - Rob260 00:02:21 01/10/11 Stock = just fine (n/m) - John (MD) 13:52:00 01/10/11
Post a Followup	You cannot reply to this message because you are not logged in.