Subject	I believe for the cometic head gasket to work
Posted by	Jim (Selin Design) on January 09, 2011 at 4:13 PM
	This message has been viewed 197 times.
In Reply To	head gasket opinions from the experts.... posted by puchy on January 09, 2011 at 03:19 PM
Message	properly you need to lap the heads and block flat after having them decked. Seems like a lot of work given the stock gasket is known to work well. (Such as in Greg Dupree's 9.3 second car, IIRC) Here a link to a guy on a supra forum discussion lapping and it sounds like he may be renting out the lapping block: La-Z-Link Even if you had all the right equipment is may still be a matter of experience and individual skill to get good results. It seems to me if you used improper form lapping you could mess up the flatness. www.selindesign.net
Follow Ups	head gasket opinions from the experts.... - puchy 15:19:57 01/09/11 let me know what you decide to do, i'm in a similar boat - vulcanrush 16:00:57 01/09/11 yes, but I still have my doubts and one of my biggest - puchy 16:16:18 01/09/11 a few knowledgeable people, like aliaz said stock - vulcanrush 16:25:48 01/09/11 Thank you guys, I will have Cometic head gaskets.... - puchy 22:38:55 01/10/11 I believe for the cometic head gasket to work - Jim (Selin Design) 16:13:11 01/09/11 I don't think I'm qualified for that job. the smoothness - puchy 16:29:18 01/09/11 OEM - Period. (n/m) - phillyz 16:33:13 01/09/11 Are you running 88mm pistons with oem gasket or - puchy 17:17:14 01/09/11 Many have. The OEM Head Gasket works with 88 mm Pistons. (n/m) - MixManMash 20:08:31 01/09/11 OEM is fine with 88mm pistons. - nissanguyz32 21:44:53 01/09/11 Tomei MLS gaskets - Rob260 00:02:21 01/10/11 Stock = just fine (n/m) - John (MD) 13:52:00 01/10/11
Post a Followup	You cannot reply to this message because you are not logged in.